Section 1 Introduction |
1.1 |
Definition of Urban Pollution Management |
1.2 |
Purpose and benefits of UPM Manual |
1.3 |
Status of the UPM Procedure |
1.4 |
Scope of the UPM Procedure |
1.5 |
The UPM Ptocedure |
1.6 |
Structure of the UPM Manual |
1.7 |
Strategic planning and application Issues |
Section 2 Regulatory Aspects |
2.1 |
Environmental regulation of wet weather discharges |
2.2 |
Performance criteria for CSOs |
2.3 |
Wet weather standards for protecting river aquatic life |
2.4 |
Standards for protecting bathing waters |
2.5 |
Standards for protecting shellfish waters |
2.6 |
Standards for protecting amenity use |
Section 3 Initial Planning |
3.1 |
Overview of Section |
3.2 |
Assessment of the problem |
3.3 |
Is a planning study required |
3.4 |
Determine environmental and planning framework |
3.5 |
Planning a UPM study |
3.6 |
Iterative planning approach |
3.7 |
Confirmed planning approach |
3.8 |
Programme and resource plan |
Section 4 Data Collection |
4.1 |
Introduction |
4.2 |
Planning |
4.3 |
Equipment |
4.4 |
Guidance on site applications for data collection programmes |
4.5 |
Data collection management |
4.6 |
Further considerations for data collection in estuary and coastal studies |
Section 5 Construct UPM Tools |
5.1 |
Introduction to modelling tools |
5.2 |
Rainfall modelling |
5.3 |
Sewer flow and quality modelling |
5.4 |
Sewage treatment works quality modelling |
5.5 |
River Impact Modelling |
5.6 |
Tidal waters modelling |
5.7 |
Integrated urban pollution modelling |
Section 6 Assessing Performance |
6.1 |
Generic UPM methodology |
6.2 |
Methodology for testing compliance with standards for protecting freshwater aquatic life |
6.3 |
Methodology for testing compliance with standards for protecting bathing and shellfish waters |
Section 7 Post Planning Study Issues |
7.1 |
Discharge permits |
7.2 |
Engineering design |
7.3 |
Performance monitoring |
7.4 |
Maintenance of models and databases |
7.5 |
Cost benefit assessment |
Appendix A | Background information relating to the fundamental intermittent standards |
A.1 |
Correction factors |
A.2 |
History of the development of the Fundamental Intermittent Standards |
A.3 |
Scientific basis for the standards |
A.4 |
Salmonid spawning grounds |
A.5 |
Water Framework Directive |
Appendix B |
Background information relating to the coliform standards for protecting bathing waters |
B.1 |
Background to development of the standards |
B.2 |
Development of the standards for the revised Bathing Water Directive |
Appendix C |
Numerical performance descriptions of devices achieving standards for protecting amenity uses |
C.1 |
Introduction |
C.2 |
Numerical performance descriptions |
C.3 |
Derivation of the numerical descriptions |
C.4 |
Testing protocolfor novel devices |